A 2 flavor soda fountain lets you dispense two post-mix beverages from a single compact tower — no bottles, no cans, no wasted counter space.
Here's a quick look at the top options to compare:
| System Type | Cooling Method | Price Range | Best For |
|---|---|---|---|
| Tower w/ Cold Plate | Ice bin | ~$2,100 | Home bars, low budgets |
| Tower w/ Remote Chiller | Electric water bath | $2,660–$3,775 | Offices, small cafes |
| Tower w/ Under-Counter Ice Maker | Built-in ice | Higher | All-in-one convenience |
| Counter Electric (Remanufactured) | Electric water bath | ~$2,850 | No-ice commercial setups |
Running a small bar, cafe, or office break room means every inch of counter space matters. Two flavors is often all you need — and the right compact system can deliver both cold, carbonated drinks on demand without the bulk of larger commercial units.
These systems work by mixing concentrated bag-in-box syrup with carbonated water at the moment you pour. The tower itself is surprisingly small — typically just 10 inches wide and 16 inches tall — but it performs like the machines you see behind the counter at your favorite restaurant.
The key decisions come down to three things: cooling method, new vs. remanufactured components, and ongoing supply needs like CO₂ and syrup. Get those right, and a dual-flavor tower punches well above its weight.
When we talk about a 2 flavor soda fountain, we are diving into "post-mix" technology. Unlike "pre-mix" (which is essentially soda already made and stored in a keg), post-mix systems separate the ingredients until the very last second.
Inside the tower, you have specialized valves designed to blend syrup and carbonated water in a precise ratio. This process allows a single 5-gallon Bag-in-Box Syrup container to produce roughly 30 gallons of finished soda. For a small business in Philadelphia or a busy office in Wilmington, this means less storage for heavy crates of cans and more room for everything else.
The carbonation process is the "magic" behind the bubbles. A carbonator motor hitches a ride on your water line, pumping water into a pressurized tank filled with CO2. This "seltzer" then travels to the tower to meet the syrup. Our systems are designed to be compact, focusing on high-quality stainless steel towers that look professional in any setting, from a sleek Newark cafe to a home "man cave" in Cherry Hill. You can find more details on our beverage equipment page.
One of the biggest selling points of a dual-flavor system is its minimalist footprint. While industrial machines found in fast-food chains can be four feet wide, a standard 2 flavor soda fountain tower is remarkably slender.
According to Soda Dispenser Depot equipment specs, a typical 2-flavor tower measures approximately 10" W x 9" D x 16" H. This allows it to fit on almost any standard countertop without displacing other essential tools like espresso machines or point-of-sale systems. Even the supporting hardware is designed for tight quarters; for instance, a standard carbonator is only about 6" W x 15" D x 13" H.
We often see these systems installed in specialized environments where a 6- or 8-flavor monster would be overkill.
To get your 2 flavor soda fountain up and running, you need more than just the tower on the counter. A complete system is a symphony of several parts working together:
Before we arrive for an installation in Princeton or Atlantic City, we always ensure the site is ready. You’ll need a standard 115V AC power outlet for the carbonator (which pulls about 6 AMPs).
Plumbing is equally important. You need a dedicated water line with enough pressure to feed the carbonator. If your water pressure is too low, the carbonator won't be able to stay ahead of the demand. Additionally, if you are using a system with a drip tray, you'll need a way to drain the excess liquid, though many countertop models use a "manual" tray that you simply empty at the end of the day.
A standard 5 lb CO2 tank is the go-to for small systems. It’s light enough to carry but holds enough gas to dispense several boxes of syrup. We recommend keeping your bag-in-box syrup in a cool, dry place at ambient temperature. You don't need to refrigerate the syrup bags themselves; the cooling happens right before the drink hits the cup!
The biggest technical choice you'll make is how to keep the drinks cold. Soda that isn't cold enough won't hold its carbonation, resulting in a "flat" drink that tastes like disappointment.
| Feature | Cold Plate System | Remote Chiller / Water Bath |
|---|---|---|
| Cooling Source | Needs Ice (Ice Bin) | Electric Refrigeration |
| Electricity | None (for cooling) | Requires 115V/7AMP |
| Maintenance | Keep covered in ice | Check water levels |
| Best For | Bars with existing ice bins | Offices, cafes without ice |
| Price | More affordable (~$2,100) | Premium (~$2,660+) |
For more details on these setups, see our beverage dispensing equipment guide.
A cold plate is a heavy block of aluminum with stainless steel tubes cast inside. You place this block (usually 8" x 12") in the bottom of an ice bin. As the syrup and water travel through the tubes, the ice chills the aluminum, which in turn chills the liquid.
It’s an incredibly reliable, non-electric way to cool drinks. The only catch? You must keep the plate covered in ice. If the ice melts and the plate is sitting in lukewarm water, your soda will be warm. It’s a great, cost-effective choice for bars in Philadelphia that already have plenty of ice on hand.
If you don't want to mess with ice, a remote chiller is the way to go. These units use an electric compressor to create a "water bath" that stays just above freezing. The product lines run through this cold bath before reaching the tower.
These units are "set it and forget it," but they do require about 2-3 inches of clearance for airflow. A compact remote chiller for a 2 flavor soda fountain typically weighs about 108 lbs when shipping and up to 145 lbs when filled with water. It's a powerhouse for high-performance cooling in a small package.
We pride ourselves on making installation simple. Most of our 2-flavor systems come pre-assembled with labeled lines and professional clamps. This means when we arrive at your location in Newark or Wilmington, we can have you pouring in no time.
"Brixing" is the industry term for adjusting the ratio of syrup to water. If a drink is too sweet, the "brix" is too high. If it's watery, it's too low. Most syrups are designed for a 5:1 ratio (five parts water to one part syrup).
Using a brix kit—which includes a syrup separator and a ratio cup—our technicians (or you!) can fine-tune the valves in just a few minutes. This ensures that every cup of cola or ginger ale tastes exactly like the brand intended. Regular beverage equipment maintenance services include checking these ratios to keep your customers coming back for that "perfect pour."
To keep your 2 flavor soda fountain running smoothly, a little TLC goes a long way:
A tower is a stationary dispenser that sits on the counter, perfect for self-service or dedicated drink stations. A bar gun (or "soda gun") is a handheld unit on a flexible hose, which is better for bartenders who need to move quickly and dispense up to 14 different liquids from one handle. For small spaces, a 2-flavor tower is often more aesthetically pleasing for customers.
Absolutely! We can configure your 2 flavor soda fountain to dispense one carbonated drink (like cola) and one non-carbonated drink (like lemonade or iced tea). We simply bypass the carbonator for the specific valve you want to remain "still."
It depends on how much soda you pour, but generally, you need enough ice to keep the plate completely submerged. For a low-volume setup, a standard under-counter ice maker producing 65 lbs of ice daily is more than enough to keep your cold plate chilled and your cups full.
Whether you are looking for a sleek addition to a home bar in Cherry Hill or a reliable beverage solution for a small cafe in Philadelphia, the 2 flavor soda fountain is a champion of efficiency. By choosing a compact system, you save space without sacrificing the professional quality your guests expect.
At Carbonator Rental, we’ve been "Powering the Perfect Pour Since 1955." As a family-owned, Philadelphia-based business, we don't just drop off a box of parts. We provide full-service installation, dependable local bag-in-box syrup delivery, and fast emergency support when you need it most. Our flexible beverage equipment rentals are designed to help your business grow without the burden of high upfront costs.
Ready to upgrade your beverage game? From Newark to Wilmington and everywhere in between, we are here to help you find the perfect fit for your small space. Contact us today to explore our 2-flavor systems and start pouring!